GS OPTICAL TURNSTILE SERIES
OPTICAL TURNSTILES A203
Optical Turnstile Product Description
The GS Optical Turnstiles also so called GSPR (General Systems Pedestrian Retractable) is designed to control pedestrian entering or exiting restricted areas, personal surveillance is recommended as the barrier can be breached. The ultra quiet retractable barriers allow for rapid pedestrian movement through the lane while the advanced optical sensors prevent “tailgating” and crawling by those without proper credentials.
The standard model has an aisle (lane) width of 520mm and the maximum of the lane can be 600mm. The construction consists of sheet metal housings that can be extended with intermediate parts to a user-defined line configuration corresponding to the needs, e.g. in case of a high throughput.
The aisle is blocked by means of a retractable triangular wing made of an acrylic glass wing. After an opening pulse the wing retracts into the housing, consequently the aisle is completely clear. It does immediately after passage or after an adjustable time-out.
The opening and closing times of the wings are from 0.8-1.5 seconds, depends on the user’s requirements.
Optical Turnstile Main Technical Parameters
1. Max. passengers/min: 40 Person/min
3. External Dimension：1200x280x980mm
3. Power Voltage: AC220±10％V，50HZ
4. Input: Dry Contact signal, relay signal.
5. Working Environment Temperature: -25℃—+65℃, Indoor or outdoor
6. Noise ＜ 75dBA
7. Faults self-detection and alarm function
8. The working status can be mechanically set by the buttons on built-in control panel.
9. Many working modes for optional
a. one way by card reading/one way no entry
b. double ways by card reading
c. one way card reading/one way freely (w/ or w/o pushing button)
d. double ways freely (w/ or w/o pushing button)
10. Gate open automatically when power off
11. standard RS485 communication（Optional）
13. With LED direction indication
14. 14. GS optical turnstiles/Flap Barriers can be eaily inferface with:
Computer Attendance Systems / Ticket Scanners
Electronic / LCD Counters
Push-Button and Wireless Remotes
Optical Turnstile Housing
The construction consists of different segments bolted together. The middle segment contains the controller and the drive unit. The middle segment has two hinged locked doors providing access to the controller and drive mechanism.Various optional access control devices (such as card readers, finger print readers etc.) can be accommodated on a behind an acrylic glass panel located at each end segment of the pedestrian barrier.
At each barrier end you will find a so called LED Gate direction indicator that displays the current operational state to the user. Green arrow for entry free, Red Cross for passage locked.
This design is for indoor installations and made of polished 304 stainless steel with protection class IP55.
Optical Turnstile Layout Drawing
Optical Turnstile Description of the gate wings
The barrier is available with two wing types, that are either a composition of a 20mm acrylic glass. With the use of soft wings the risk of injury or damage is minimized, even in the event of a visitor running into the closed retractable barrier. Furthermore, a significant increase of the opening and closing time can be achieved, resulting in a much better tail-gating behavior to reach to the customer’s advantage.
Optical Turnstile Function
Passage in both directions electronically controlled. The pedestrian retractable barrier is available in Normally Open (N/O) or normally Closed (N/C) mode. In N/O the speed gate provides an always open walkway in rest position and will only close at unauthorized entry or tailgating attempts.
Optical Turnstile Driving Mechanism
The wings are moved by mechanical arms. The arms are rotated by a torque shaft connected to the drive unit. The drive unit is a DC motor working in conjunction with a bi-directional encoder. A microprocessor control system guarantees the precise movement and positioning of the wings.
Optical Turnstile Method of Operation
ON receiving a signal from the access control system, or push button, the wings open. If an unauthorized person tries to tailgate or attempts to enter from the opposite direction, the system detects the unauthorized passage and activates the in-built alarm system.
Optical Turnstile Status Lights
90mm dia. LED display status lights flush mounted within the speed gates lid top face. Upon authorization a Green arrow will illuminate in the direction of passage authorization whilst in the opposite direction a Red Cross symbol will illuminate to indicate the unit is not available for use or is already in use.
Power Failure: In the event of a power failure the wings will automatically open for exit freely.
Fire Alarm: Input facility is available for voltage free contact supplied by others to effect fail state.
Optical Turnstile Interface: Potential free contact provided by either card reader or pushbutton input. Card reader inhibit and reset outputs signals are available as standard.
Optical Turnstile Users Include：Government Retail/Finance/Telecommunications/Information Technology /Banking /Publishing/Leisure/Petrochemical/Education etc.
Optical Turnstile Access Control System
Optical Turnstile Integration
Optical Turnstile A203 Installation Images
GENERAL SYSTEMS is one of the leading access control electronic optical turnstile gates manufacturers and suppliers, Welcome to visit our website and buy or wholesale our cheap access control electronic optical turnstile gates at low price.
We're Here to Help