Home > Products > Tire Killers
Heavy Duty Hydraulic Tyre Killers with Spikes for Highly Secured Entrances Such as banks, Military, Government Offices etc.

Heavy Duty Hydraulic Tyre Killers with Spikes for Highly Secured Entrances Such as banks, Military, Government Offices etc.

Hydraulic Tyre Killers Model: HTK001 GS hydraulic tyre killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high...

Description

Hydraulic Tyre Killers

Model: HTK001


GS hydraulic tyre killers are designed especially for entrance points which have a threat of vehicle attack or for the ones that have high security requirements. If there is a threat of vehicle attack in addition to the control of vehicle access in high security applications, hydraulic tyre killer are one of the most secure systems. Even though the attack is from high tonnage vehicles with high speeds, it's not possible for the vehicle to keep on moving because of the damage given to wheels and the rim of the vehicle. Drive unit is hydraulic, but in case of power failure tyre killer can be lowered or lifted manually with the help of manual hand pump. With the help of PLC controller, raise/lower function can be achieved by every kind of card readers, biometric readers like fingerprint etc, radio control, on/off key switch etc. Besides, safety accessories like photocells, inductive loop detectors, flashing lights or red/green traffic lights can be integrated to the system very easily.

 

HYDRAULIC TYRE KILLER GENERAL FEATURES

GS hydraulic tyre killers which electrohydraulically operated, is completed with hydraulic pump in outside cabinet and a control switch; GS hydraulic tyre killer is an effective way to stop even wider vehicles than cars. When closed, tyre killer is totally hidden in the street surface, so it allows the drive to all vehicles; when raised, it can stop even great trucks at a speed of 80Km/h. It is typically used for perimeter protection of military bases, embassys, government buildings, airports and some other important public service places, in car parking and a san anti-terrorist measure.

 

HYDRAULIC TYRE KILLER CONTROL CABINET 

IP65 protection is available in the cabinet 1.2 mm thick galvanized sheet metal is utilized in the body. It is painted electrostatically with RAL 7032 emboss point.

 

HYDRAULIC TYRE KILLER CONTROL SYSTEM

Control electronics utilized in hydraulic tyre killer is PLC controlled. Motor is driven by a contactor and protected by a thermic breaker. The low current voltage required by the system is supplied by a switch mode power supply. There is a fuse for every component in the system. All the cables running in the system are colour coded and numbered to ease tracking. There is a control keyboard in the power group as well as the desk-top one for the guard room. Time delay automatic-raising of the hydraulic tyre killer can be adjusted between any time period. Power requirement of the hydraulic tyre killer is 380 V 50~60Hz (or 220 V 50~60Hz, optional).

 

HYDRAULIC TYRE KILLER CONSTRUCTION AND DRIVE UNIT

Main mechanical elements forming the construction are heavy duty 12mm top plate and the frame consisting of 80x60x3 mm box, 100*50 mm NPU and 100 mm NPI beams. This sophisticated mechanical design enables the tyre killer to withstand 60 tons of axle loads, besides, in case of crash, linkage bars transmit the impact directly to the foundation, therefore help to protect mechanism. A cushioned cylinder powers the road blocker up as it pivots on multi-sealed bearings. All the parts are hot dip galvanized/3 layers primary coated and 3 layers painted to yellow and black, in order to prevent rusting.

 

HYDRAULIC TYRE KILLER DATASHEETS

Items

Specs

Application range

Intersection safe protection in main area

Material

Galvanized sheet steel/A3 steel

Surface treatment

Paint with reflective stripe

IP

IP67

Standard color

Black and yellow

Length

2m-3m-4m-5m-6m Greater Length On Request

Distance between Blocking Spikes

200mm

Blocking Spikes Thickness

10mm

Pit Dimension Length 2m

H600*1030*2224mm

Width

580mm

Height from ground

70~110mm

Min weight capacity

40T

Blade height

150mm

Movement

Hydraulic

Working environment

-40℃~+70℃

Control mode

Short range wireless remote control/drive-by-wire

Remote Control distance

≤30M

Up/Down speed

2s

Emergency Manual Lowering

Yes

Connection Line to control Unit

10m (Max Length. 30m)

Voltage

220V - 50/60Hz

HYDRAULIC TYRE KILLER ACCESSORIES (OPTIONAL)

  • Flashing or red/green traffic lights

  • Remote control receiver, transmitter

  • Safety photocell, stand and casing

  • Inductive loop detector

  • Drainage pump

  • Card reader system

    • Hydraulic accumulator


    HYDRAULIC TYRE KILLER LAYOUT


     

    HYDRAULIC TYRE KILLER INSTALLATION IMAGES



    GENERAL SYSTEMS is one of the leading heavy duty hydraulic tyre killers with spikes for highly secured entrances such as banks, military, government offices etc. manufacturers and suppliers, Welcome to visit our website and buy or wholesale our cheap heavy duty hydraulic tyre killers with spikes for highly secured entrances such as banks, military, government offices etc. at low price.

    Related Products

    Feedback

    We're Here to Help

    • +86-755-83520669
      +86-755-83528876 
      info@barrierbollard.com
      Building A,Qifeng Park, Lilang, Nanwan,
      Longgang District, Shenzhen,China

    Newsletter

    Enter in your email address to receive deals
    and coupons.
    Bookmark us today!